Removing the SECURE inscription on the monitor Nissan Primera
1. Turn on the ignition.
2. Until this inscription appears, press SETTING, DISPLAY, SETTIINGS DISPLAY TIMEOUT, move the window to the position NONE, OFF or BACK.
3. Turn off the ignition.
4. Now, when you turn on the ignition, as well as when starting the engine, it is enough to wait for this inscription to appear and press either TEMP or INFO, and after that the inscription will not appear.
Notes:
Unfortunately, only until you drown it out. After the next start-up, you need to perform step 4 again (PRESS TEMP or INFO).
I will add Secure decryption
If there is any violation during communication with NATS, one of three variants of the message "SECURE" will appear on the display, indicating the presence of one of three types of communication failures.
The message "Secure" on a red background indicates a communication failure between the navigation system control unit and the audio system, which may be caused by damage to the navigation system control unit, or the fact that this unit was previously used on another vehicle.
The "Secure" message on a green background indicates a communication failure between the NATS IMMU and the audio system, which may be caused by damage to the audio system unit, or the fact that this unit was previously used on another vehicle.
The "Secure" message with a yellow background indicates that the transponder (NATS key) is not working properly, or that it was previously used on another vehicle.
The message "Secure" that appears (on any background) can be removed by a reset operation using the CONSULTII device associated with the immobilizer PIN (this does not require returning the radio to the Clarion service center). If the "Secure" message cannot be cleared during the reset operation, the component (indicated by the color of the message) is defective and must be replaced.
The article is missing:
- High-quality photos of repair
Source: http://www.primera-club.ru/f/baza-znaniy-p12/16996-ubiraem-nadpis-secure-na-monitore/
