Soundproofing front doors Mercedes-Benz Vito W639

Tools:

• ​Set of plastic mounting spatulas
• Scissors
• Knife
• Electric hair dryer technical
• Roller

Parts and consumables:

• rags
• White spirit (degreaser)
• Vibration isolation STP Aero (approximately 2 sheets per 1 door)
• STP Bitoplast 10 mm (approx. 1 sheet per 1 door)

1. Open the front doors on the Mercedes Vito.

2.  After that, you need to remove the door trim of the Mercedes Vito.

Open front door on Mercedes Vito

3.  Degrease the door areas where the vibration isolation will be glued.

4.  Cut out suitable pieces of vibration isolation and heat them up with a heat gun.

STP Aero

5.  Glue the door with vibration isolation and roll it with a roller.

6.  Degrease the door trim, cut out suitable pieces of bitoplast, heat them with a technical hair dryer. Apply Bitoplast to the door trim and roll it in with a roller.

STP Bitoplast 10

Sheathed door card Mercedes Vito

7. Install all removed parts in the reverse order of removal.

Useful advice:

If you do not have a hair dryer, then you can heat the material in the sun or on the stove.

The article is missing:

• Tool photo
• Photo of parts and consumables

Source:  http://carpedia.club/