Removing the cylinder heads of the engine model 1MZ-FE Toyota Camry 2001 - 2006

Tools:

• T-shaped socket wrench 5 mm
• T-shaped socket wrench 8 mm
• Nozzle on the crank 10 mm
• candle key
• Special tool 09213-54015
• Special tool 09950-50013

Parts and consumables:

• rags
• wooden blocks

1. Remove the intake and exhaust valve shafts .

2. Using an 8 mm wrench, remove the hexagon socket head bolts on each cylinder head.

The order of loosening the bolts with an internal hexagon on each cylinder head

3. Evenly loosen and remove the two nuts and eight cylinder head bolts in several passes in the sequence shown in the figure.

The order of unscrewing the nuts and bolts of the cylinder head

Attention:

Incorrect order of unscrewing the bolts can lead to deformation of the head of the block.

4. Remove the cylinder head from the guide pins on the cylinder block and lay it on a flat surface with wooden blocks and rags.

The article is missing:

• High-quality repair photos

Source: http://carmanz.com/toyota/camry-2001-2006/231152-tc2001451.html