Nissan
Qashqai
1 generation [2007 - 2010]
Petrol
1 generation [2007 - 2010]
Maintenance
Body and Interior
Undercarriage
Transmission
Steering
Brake system
Engine
Electrical equipment
Ventilation and air conditioning system
Security system
Spare parts and consumables
Add to garage Filter

Removal and installation of an upholstery of a back door of Nissan Qashqai 2007 - 2013

print share bookmark_border
0 Views
0.0 Rating
Tool
Not indicated
Period:
Total views:
Per year:
Per 30 days:
Per 7 days:
Today:
Duration of viewing:
Watching now:
0.0
Average rating
0votes
5
0
4
0
3
0
2
0
1
0
Rate article
Good (4 points)
Tool
A tool is required to perform operations
Not indicated
Average running time
0 votes

Car services nearby

Tools:

  • Open-end wrench 10 mm
  • Collar for end nozzle
  • Nozzle on the crank 10 mm
  • Screwdriver flat medium

Parts and consumables:

  • tailgate upholstery
  • Tailgate upholstery clips
  • Decorative overlay of the handle of the lock of a back door

Removing and installing rear door trim on Nissan Qashqai

1. Use a screwdriver to pry off the trim on the inside handle of the lock.

Decorative lining of the inner handle of the Nissan Qashqai lock

2. Overcoming the resistance of the clamps, take the back of the decorative trim away from the rear door upholstery.

Decorative lining of the inner handle of the Nissan Qashqai lock

3. Pull the handle of the rear door lock and, removing it from the opening of the decorative trim.

Decorative lining of the inner handle of the Nissan Qashqai lock

4. Remove a decorative overlay.

Decorative lining of the inner handle of the Nissan Qashqai lock

Note:

Check the latches on the trim on the rear door lock handle. Replace the trim if the clips are damaged.

Nissan Qashqai Lock Handle Trim Clips

5. Pull the edge of the tailgate upholstery.

Nissan Qashqai rear door upholstery edge

6. Overcoming resistance of clamps, separate a covering from the internal panel of a door.

Upholstery and inner door panel Nissan Qashqai

7. Lifting up, take the trim away from the Nissan Qashqai rear door panel.

Upholstery rear door Nissan Qashqai

8. Expand the door upholstery.

The reverse side of the rear door upholstery Nissan Qashqai

9. Press the clamp of the wiring harness block.

Retainer of the block of wires of the power window button Nissan Qashqai

10. Disconnect the block from the power window control key.

Block of wires of the button of window lifter Nissan Qashqai

11. Remove the rear door trim Nissan Qashqai.

Note:

The location of the plastic clips of the door upholstery

The upholstery (view from the back) is attached to the door panel with nine plastic clips.

12. Replace damaged caps with new ones by removing them from the upholstery brackets.

Plastic piston door upholstery Nissan Qashqai

13. If necessary, remove the power window control key, for which press the lock with a screwdriver.

Nissan Qashqai Power Window Button Retainer

14. Push the block through the door upholstery opening.

Nissan Qashqai door power window key block

15. Press the latch on the side of the power window control key.

Retainer on the side of the power window control button Nissan Qashqai

16. Remove the block from an upholstery of a back door.

Nissan Qashqai power window key block

17. Turn out two bolts of fastening of an arm of an upholstery of a back door to the panel of a door.

Two bolts of fastening of a bracket of an upholstery of a back door of Nissan Qashqai

18. Remove the bracket.

Rear Door Trim Bracket Nissan Qashqai

19. Pull the edge of the moisture-proof film and remove it from the door panel.

Nissan Qashqai Door Panel Waterproof Film

20. Install the rear door trim on the Nissan Qashqai and all removed parts in the reverse order of removal.

The article is missing:

  • High-quality repair photos
  • Tool photo

Source:  http://nissan-qashqai.dv13.ru/kuzov/snyatie-i-ustanovka-obivki-zadnej-dveri/

favorite 0
print
share
bookmark_border
None

Login or register


account_circle
vpn_key
account_circle
vpn_key
lock
Cancellation