Removing and installing the front seat on the Nissan Almera Classic

You will need a discount key "for 10".

NOTE:

The work is shown for the left seat, the right seat is removed in the same way.

Removing and installing the front seat on the Nissan Almera Classic

1. Disconnect a wire from the minus plug of the storage battery.

2. Move the seat all the way forward. Remove the skid pads installed in their rear parts.

3. Turn out two back bolts of fastening of a sled to the basis of a body.

NOTE:

This is how the rear sled attachments to the body are located.

4. Slide the seat all the way back, unscrew the left bolt.

5. Turn out the right bolt of forward fastening of a sled of a seat to the basis of a body.

6. Raise the seat.

7. Squeezing the fasteners, disconnect the pads of the seat heater wiring harness and the seat belt buckle sensor.

8. Remove the seat from the Nissan Almera Classic.

9. Install the seat in the reverse order of removal. Apply anaerobic sealant to the seat mounting bolts before installation.

Source: http://remont-nissan-almera.net/kuzov/318-sidenya-snyatie-i-ustanovka-perednego-sidenya.html