Removing and installing the front passenger airbag Chery Tiggo

You will need a key "for 10".
1. Disconnect a wire from the minus plug of the storage battery.
Warnings.
Attempting to remove the airbag without turning off the power may cause the airbag to deploy unexpectedly.
It is possible to proceed with the following operations to remove the airbag only after the activator capacitor is completely discharged. To discharge the capacitor, you must wait at least 15 minutes after disconnecting the wire from the "minus" terminal of the battery.
Do not disassemble the airbag module.
Do not drop the airbag module or allow water, grease or oil to come into contact with it.
The airbag module must not be exposed to temperatures above 95°C.
2. Remove the glove box.
3. Remove the two screws securing the airbag module bracket to the instrument panel, carefully lift the module, disconnect the wiring harness block from the module terminals and remove the airbag module.
4. Install the airbag module in the reverse order of removal.

Source: http://chery-tiggo.dv13.ru/sistema-passivnoj-bezopasnosti-srs/snyatie-i-ustanovka-podushki-bezopasnosti-perednego-passazhira/