![1 generation [2001 - 2005]](/uploads/Hyundai_Matrix_2002-2006_.jpg)
Removing the radio mounting panel
We remove the radio receiver mounting panel when dismantling the instrument panel and for access to the heater.
1.Remove the stowage shelf (see Removing the stowage shelf ).
2. We turn off the self-tapping screw for fastening the floor tunnel lining to the radio receiver mounting panel (see Removing the floor tunnel lining ).
3. Prying off with a screwdriver, remove the rear fog light switch.
4. Having marked the wire connectors, disconnect them.
5. Having removed the tailgate glass heating switch, disconnect the wire block.
6. Having removed the heater motor switch, mark the wire connectors and disconnect them.
7. Having removed the switch of a cleaner and a washer of glass of a door of a back, we disconnect a block of wires.
8. Prying off with a screwdriver, remove the outdoor lighting switch.
9. Disconnect the wiring block.
10. Using a screwdriver, disconnect the handle of the air damper control lever.
11. Similarly, we remove the control handles for the windshield heating damper and the heater tap.
12. Using a Phillips screwdriver, unscrew the screw of the right fastening of the radio receiver panel to the instrument panel.
13. Similarly, we turn off the self-tapping screw of the left fastening of the radio receiver panel.
14. Prying off the radio receiver mounting panel with a screwdriver from above in two places, we remove it from the instrument panel.
15. Disconnect the two connectors for the backlight lamps of the heater control levers.
16. Remove the radio mounting panel.
17. Install the radio receiver mounting panel in reverse order.
Source: http://automn.ru/hyundai-matrix/hyundai-34789-10.m_id-3292.m_id2-4452.html
