Removing the dashboard Nissan Qashqai

Taking off the instrument panel, took photos. Perhaps I missed something, do not blame me. You can’t call this an instruction, but perhaps it will help someone to navigate.
So, first of all: disconnect (-) from the battery !
Next, remove EVERYTHING that is adjacent to our central panel:
- Dashboard.
- Steering wheel cover.
— Switches turns and wipers.
- The lower plastic panel at the driver's knees.
- Glove box.
— Tunnel gear selector, handbrake, cup holders and armrest.
— Side plastic elements on the panel.
— Dashboard visor.
— Pads of the side pillars (mounted on THREE fasteners, and inserted into the groove from below)

Left and right, remove the mesh of the speakers under the glass. It is better to use panel pullers or something flat but without sharp edges. They are easy to take off, but scary. We just pry the mesh from the side of the circle. By the way, on the left (on the driver's side) the circle cannot be removed from the mesh, but on the right - it is the refreshment sensor. Disconnect the sensor and speaker wires.
We see the bolts under each mesh.

Next, remove the triangular panels on the sides of the panel (visible when the door is open) and find the screws.

Further, everything is simple:

On the right, in place of the glove compartment:

We remove the air ducts on both sides that blow into the legs, we get access to the bowels of the panel. On the passenger side we find the front cushion and TWO bolts. Don't forget to unplug the pillow (yellow) ! ( with the terminal removed from the battery )!

Above the radio, do not forget to remove the GPS from whoever has it and find the screws.

It seems everything. Do not shoot alone!
Everything is done at YOUR risk.

Source: http://www.drive2.ru/l/6034364/