Removing the front wiper arm Nissan X-Trail

Removing the front wiper arm Nissan X-Trail

1. Place the car on a level surface, and turn off the ignition.

2.  Mark the position of the wiper blades in their original position, for example by gluing strips of paper. 

Note:

This is necessary in order to ensure optimal operation of the brushes in the required area of ​​the wind window after the levers are in place.

3. Use a flathead screwdriver to remove the wiper arm cover.

4. Using a 14 mm socket, unscrew the nut securing the Nissan X-Trail wiper arm.

5. Shaking the wiper arm, remove it from the axis of the leash.

Note:

If the lever is very sour, you can use a special puller to remove it.

6. Examine a condition of the lever. If necessary, replace the Nissan X-Trail front wiper arm with a new one.

7. Remove dirt and rust from the trapezoid axle.

8. Install the wiper arm on the Nissan X-Trail in the reverse order of removal. Tighten the fastening nut to 24 N•m.

9.  Similarly remove and replace the second lever. 

Note:

When installing, make sure that the left brush is located at a distance of about  40 mm from the bottom edge of the glass, and the right brush is 34 mm (when viewed in the direction of the car).

Source:  carpedia.club