Removing the rear bumper Toyota Corolla

When trying to remove the reflectors, I had to remove the bumper.
In order to remove the bumper you need:
Tool:

Wrench S=10mm, flathead and Phillips screwdrivers and wire cutters will come in handy.

1. Remove the mud flaps that are mounted on three bolts each.

2. Unscrew two more bolts under the trunk lid.

3. We remove 4 pistons along the bottom of the bumper, for this we first pick them with a screwdriver, and then, holding them in wire cutters, pull them down.

This is what the bottom pins look like.

This is how we grab them and pull them out.
4. It remains to remove two more pistons holding the upper corners of the bumper in the wheel arches, they resemble small building plugs in which a screw is screwed.

5. It remains to release the bumper from the latches and remove it ...

Release the latches.

After removing the bumper, I continued to work on removing the reflectors

The locking pin broke off.

Since the latch on one of the reflectors broke off, and WD40 did not help, it was decided to cut it off with a grinder.

The lower caps have retained their appearance, but the small ones, similar to construction plugs, seem rather weak for the second application.

Source: https://www.drive2.ru/l/6570092/