Removing the rear light, replacing lamps on Renault Sandero and Sandero Stepway cars

We carry out the work when replacing the lamps in the rear light or replacing the light itself.
Operations are shown on the right lamp, for the left lamp they are similar.
Open the tailgate and unscrew the plastic nut securing the lamp. 

We take the lantern away from the car body.

 By pressing the latch, disconnect the block of wires from the lamp connector ...

 ... and remove the lantern. 

Remove the headlight cover. 

We press three latches ... 

... and remove the holder with the lamps. 

By pressing the lamp and turning it counterclockwise, we take out the combined lamp of the brake signal and side light from the holder

Install the new P21/5W bulb in reverse order.
The protrusions on the base of the combined brake and side light lamp are located at different levels and must fit into the corresponding grooves of the cartridge during installation.
Similarly, we replace the turn signal lamp (PY21W) and the reverse light lamp (P21W) (fog light lamp in the left lamp).

Each lamp holder socket is marked with the type of lamp. 
Install the rear light in reverse order. 

Source: http://wiki.zr.ru/264-1_%D0%A0%D0%B5%D0%BC%D0%BE%D0%BD%D1%82_Stepway