Fuel Level Sensor Replacement Nissan X-Trail
1. Squeeze the latches and disconnect the 2 wire blocks from the fuel module cover.
2. Press out the plastic retainer located under the Nissan X-Trail fuel level sensor.
3. Move the sensor in the direction of the arrow.
4. Remove the fuel sensor from the fuel module.
5. If necessary, replace the Nissan X-Trail fuel level sensor with a new one.
6. Install the sensor in the reverse order of removal.
Note:
How to remove the fuel module itself can be found in the article
Removing the fuel module Nissan X-Trail 2007 - 2014
Source: carpedia.club

Generator replacement Nissan X-Trail 2007 - 2014
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Pit / Flyover


Removing the sound signal on the Nissan X-Trail
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument

Replacing the glove compartment lamp Nissan X-Trail
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument


Removing the front wiper motor Nissan X-Trail
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument


Changing the oil in a Nissan X-Trail engine
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Pit / Flyover

Compression test in cylinders Nissan X-Trail 2007 - 2014
3 - 6 hours
[[ article.getBookmarkIcon() ]]
Instrument

Cleaning the drainage holes in the body of the Nissan X-Trail
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument