Tools:
- Reply flat medium
- plastic hammer
- Special tool 09545-11000 and 09545-21000
Parts and consumables:
- New ball joint
Procedure
1. Using a flathead screwdriver, remove the protective boot from the lower arm ball joint.

2. Use a plastic mallet to tap the ball joint out of the lower arm.

3. Using the special tool (09545-11000), press the new ball joint into the lower arm assembly.

4. Use the special tool (09545-21000) to install the protective boot.

The article is missing:
- Tool photo
- Photo of parts and consumables
- High-quality repair photos
Source: http://automn.ru/hyundai-matrix/hyundai-37300-10.m_id-4950.m_id2-4952.html
Removal and installation of the center console Hyundai Matrix
[[ article.getBookmarkIcon() ]]
Instrument
Removal, disassembly, inspection and installation of the rear shock absorber strut Hyundai Matrix
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Removal and installation of a heater Hyundai Matrix
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Replacement of the switch of a control lamp of inclusion of a parking brake of Hyundai Matrix
[[ article.getBookmarkIcon() ]]
Instrument
Checking electrical equipment and charging the battery
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument