Refinement of the emphasis on the driver's seat Hyundai ix35

Tools:

• Screwdriver flat medium
• Pliers

Note:

This article describes how to refine the seats on the Hyundai ix35.

1. Unhook the upper plastic clips of the seat cover by hand.

The back of the driver's seat on the Hyundai ix35.

2. Pull the top of the backrest out of the clips.

Top fasteners.

3. Bend the two side clamps towards the center of the backrest with your hands.

4. Pry off the two lower backrest clips and remove the backrest. 

Location of lid locks.

5.  As you can see, the cable is not stretched and hangs.

Lumbar seat support for Hyundai ix35.

6.  With a flat screwdriver, pull off the lumbar support (shown by the red arrow) and rearrange these brackets to the right and left, higher, to the third wire.

7. Use pliers to snap the stop back into place. As you can see, the cable has become taut and does not hang.

Stretched lumbar support on the Hyundai ix35.

Note:

As a result, what result is achieved:

• the emphasis begins to be felt even with a slight turn of the handle;
• the emphasis has become higher, it is more convenient;
• lateral support at the back began to be felt better.

8. Install all removed parts in the reverse order of removal.

The article is missing:

• Tool photo

Source:  http://carpedia.club/