During operation, moisture accumulates in the cavities of the thresholds, doors and trunk lid, causing corrosion. To remove moisture, there are drainage holes located at the bottom of the thresholds, doors and in the trunk lid. They are constantly clogged with dirt, so clean them at every maintenance (every 15,000 km). When operating the vehicle on country roads, carry out this operation more often.
Clean the drain holes before washing the car.
Tools:
- screwdriver or thin wooden stick.
-
1. Clean the drain holes in each threshold.
2. Similarly, clean the drainage holes in the front ...
3. and rear doors.
4. Clean the drain holes in the trunk lid.
Notes:
1. If a leak is detected in the connections, tighten the clamps, plugs, nuts. Replace hoses and pipelines with mechanical damage. If the slave cylinders are leaking, repair or replace them.
2. Loose fasteners and damage to parts are not allowed. Damaged parts must be replaced.
-
-
Source: http://www.dusterclubs.ru/vb/showthread.php?t=4668

