Location of fuses, fuses and relays Hyundai ix35

Most vehicle electrical power circuits are protected by fuses. Powerful current consumers are connected via relays.

The fuse relay mounting block for the Hyundai ix35 is located in the passenger compartment and in the engine compartment.

Most fuses are installed in the mounting block in the passenger compartment. It is located in the instrument panel under a decorative cover. 

The location of the fuses on the Hyundai ix35 in the passenger compartment.

The location of the fuses on the Hyundai ix35 in the engine compartment.

To access the fuse mounting block located in the passenger compartment, do the following:

1.  Pry off the notch in the decorative cover of the mounting block with your fingers, and, overcoming the resistance of the clamps, remove the cover from the instrument panel.

Fuses in the interior mounting block for the Hyundai ix35.

Note:

Before replacing a blown fuse, find out the cause of the blown fuse and fix it. When troubleshooting, look at the indicated circuits that this fuse protects.​

On the inside of the decorative cover there is a diagram of the location of the fuses.​

Fuse layout.​

WARNING:

Do not replace fuses with jumpers or fuses of a different amperage, or homemade jumpers, as this may damage electrical appliances and even cause a fire.

2.  Using special plastic tweezers, remove the fuse to be replaced, and install a fuse of the same rating as the removed one. The tweezers are located in the mounting block located in the engine compartment.

Note:

At a blown fuse, the jumper inside the holder burned out and broke. Use a spare fuse of the same rating (and color) for replacement.

Blown fuse on Hyundai ix35.

USEFUL TIPS:

If you have lost your tweezers, then it is quite convenient to use thin round nose pliers, preferably with rubber tips.​

To access the fuses, relays and fuses of the mounting block located in the engine compartment, do the following:

1.  Squeeze out the lock of the cover of the mounting block, and remove the cover.

Note:

On the inside of the decorative cover there is a diagram of the location of the fuses.​

Fuse layout.

2. If you need to replace the fuse, grab it with special tweezers and remove it from the connector.

Note:

At a blown fuse, the jumper inside the holder burned out and broke. Use a spare fuse of the same rating (and color) for replacement.

Blown fuse on Hyundai ix35.

3.  If necessary, remove the relay by rocking it from side to side. Install a new relay. Replace fuse links in the same way as replacing relays.

Source:  http://carpedia.club/