Removing the climate control unit Nissan Note
1. Open the hood and place it on the stop.

2. Disconnect a wire from the "negative" plug of the storage battery.

3. Overcoming resistance, remove the recirculation damper lever handle.

4. Using a small flat head screwdriver, gently pry off the interior climate control unit trim.

5. Pull the block cover towards you.

6. Remove the overlay from the instrument panel.

7. Press a clamp and disconnect a block from the alarm switch.


8. Disconnect the block from the front passenger airbag deactivation signal lamp.

9. Remove the lining of the Nissan Note climate control unit.

10. Turn out 4 screws of fastening of the block of management of system of heating, conditioning and ventilation of salon to the panel of devices.

11. Press out the 4 white block latches.

12. Remove the block from the instrument panel socket and take it to the length of the attached wiring harnesses and damper drive rods.

Note:
Further, all the steps will be shown on the already removed Nissan Note climate control unit.
13. Squeeze the clamps of the shell of the drive rod for adjusting the temperature of the supplied air with pliers.

14. Remove the shell from the stop on the block body. Turning the rod in the hole of the regulator sector, disconnect it from the sector.
15. Press the latch and disconnect the electric fan speed controller block from the block.

16. Squeeze the clamps of the shell of the drive rod of the air distribution damper with pliers.

17. Remove the shell from the stop on the block body. Turning the rod in the hole of the regulator sector, disconnect it from the sector.
18. In the same way, disconnect the rod from the recirculation control lever.

19. Press a clamp and disconnect a small block of a plait of wires from the block.

20. Remove the Nissan Note climate control unit. If necessary, replace it with a new one.

21. Install the climate control control unit in the reverse order of removal.
Source: carpedia.club