Removal and installation of the Peugeot 207 engine oil intake

Tool:

• Phillips screwdriver, medium
• Socket collar
• socket head 10 mm
• Screwdriver flat medium
• Pliers
• Box wrench curved 10 mm
• Wrench 14 mm
• Chisel

Parts and consumables:

• Engine oil intake (PSA 1018.66).
• Oil intake seal (PSA 1019.30)
• Oil dipstick guide (PSA 1171.J8)
• Motor oil
• Aerosol lubricant type WD-40
• Container for drained engine oil (oil volume in the Peugeot 207 engine, at least 3.5 liters)
• Engine oil sump (PSA 0301.N1)
• Clamp for exhaust pipe (PSA 1713.66)
• rags
• sealant

Note:

The engine oil intake is installed in the engine crankcase.

1. To remove the engine oil intake, it is necessary to remove the engine crankcase pan (read the article  “ Removing the Peugeot 207 engine oil pan ”).

2.  Having removed the Peugeot 207 pan, unscrew the two screws securing the oil intake to the oil pump and the screw securing it to the cylinder block.

Oil pickup screws.

3.  Remove the engine oil pickup along with the dipstick guide.

Oil dipstick guide.

Helpful advice:

Replace the dipstick guide if necessary.

Note:

The connection of the oil intake with the pump is sealed with a rubber gasket. Replace a damaged or loose gasket with a new one.

New oil pickup gasket (PSA 1019.30).

4. Install the oil pickup and all removed parts in the reverse order of removal.

New engine oil intake (PSA 1018.66).

The article is missing:

• Tool photo
• Photo of parts and consumables

Source: carpedia.club

The article is missing:

• Tool photo

The article lacks:

• Фото инструмента