Removal and installation of facings of salon Chery Tiggo

Interior linings, molded from plastic, are attached to the body panels with plastic holders.
You will need: a flat blade screwdriver, a 17 wrench.
Note.
Removal and installation of linings on the left side of the passenger compartment are shown. Facings on the right side are removed in the same way.

1. Remove facing of a forward rack, overcoming resistance of its holders.

2. Remove a forward facing of a threshold, having pulled it up and overcoming resistance of holders.
3. Similarly remove a back facing of a threshold.

4. Disconnect the driver's seat belt lower anchor.

5. Remove the lower part of the center pillar trim by pulling it to the side and overcoming the resistance of the pillar mounting holders.

6. Disconnect the top fastening of a seat belt from the central rack.

7 .... and remove the upper part of the lining of the central pillar, overcoming the resistance of the holders of its fastening.
Note.
Inspect the cladding holders. Replace damaged holders.
8. Establish facings of salon and all removed details in an order, the return to removal.

Source: http://chery-tiggo.dv13.ru/kuzov/snyatie-i-ustanovka-oblicovok-salona/