Tools:
- Phillips screwdriver
- Socket collar
- socket head 10 mm
- socket head 13 mm
- 12mm hex wrench
Description:
1. Put the car on a pit, overpass or lift.
2. Set the car to the parking brake and set the stops if the work will be carried out on the viewing hole.
2. Get down to the bottom of the car.
3. Locate the protection of the power unit and transmission.
4. Locate and unscrew the left bolt securing the protection.
5. Locate and unscrew the right protection mounting bolt.
6. Turn off bolts of fastening in a forward part of the car.
7. Remove the protection of the power unit.
8. Install a new power unit protection in accordance with the mounting holes.
9. Check the protection fastenings at the end of the repair work.
A source:
https://carpedia.club/
The article is missing:
- OE Part Numbers
- Repair photo
The article lacks:
- Номеров оригинальных деталей
- Фото ремонта
Checking and adjusting wheel alignment Fiat Doblo 2005
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Removal and installation of the front fender Fiat Doblo 2005
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument
Removal and installation of the trunk lid lock
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Removal and installation of a cover of the hatch of a bulk pipe of a Fiat Doblo fuel tank
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Cleaning the crankcase ventilation system Fiat Doblo 2005
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Removal and installation of an upholstery of a back door of Fiat Doblo
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Changing the oil on an automatic transmission (automatic transmission) Fiat Doblo 2005-2015
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Pit / Flyover
Checking and adjusting the brake pedal free play Fiat Doblo
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Pit / Flyover
Removing and installing the Fiat Doblo air intake grille
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument