Removing and installing windshield washer jet Mercedes-Benz W203

Tools:

• Screwdriver flat medium

Withdrawal

1. Open the hood.

2.  Remove the cabin air filter box.

3. Disconnect the negative (-) battery cable with the ignition off.

Note:

Before disconnecting the cable, find out the security code of the radio.

3. Remove the front spoiler grille from the hood.

4. Disconnect the connector at the jet heater.

1 - connector;

2 - jet heater;

3 - connecting element;

4 - water hose.

5. Remove the water hose connection from the jet.

6. Disconnect and remove the jet with a screwdriver from the holder.

Installation

1. Insert the jet into the spoiler grille and fix it.

2. Put the connecting element on the jet.

3. Dock the nozzle heating connector.

4. Install the spoiler grille.

5. Attach a cable of weight (-) of the storage battery at the switched off ignition. Install the cabin air filter box. If necessary, enter the radio code and set the time on the clock.

6. Close the hood.

7. Check the performance of the jet and adjust it, refer to the appropriate section.

Adjustment

See accompanying illustration.

Check the performance of the jet.

Jet adjustment.

The article is missing:

• Tool photo
• High-quality repair photos

Source:  http://www.auto-knigi.com/model/mb_c/13_1_7/