Installing the rear speakers on the Skoda Rapid

Tool:

• Torx wrench (star)
• Drill

Parts and consumables:

• Audio speakers

1. Remove the rear door card. To do this, you need to snap off the plastic plug and unscrew the two screws with an asterisk.

2. Next, in a circle of the card, we snap off the caps around the door card and it is almost in your hands, you just need to disconnect the power window control chip and the door handle.

3. Disconnect this part and hold the door card.

4. We pull it from the rear speakers through the door chip, then through the threshold, then through the front lower plug under the front panel, fastening it with strips to the current wiring and to the radio.

5. Click off the threshold.

6. Snap off the rack.

7. Snap off the front bottom trim.

8. We drill the connector with a drill for pulling the cable and pull the cable.

9. We stick the podium, then the speaker in the door and connect the "tweeters" through the filter.

10. Here, with the help of this plug, we go out to the "tweeters".

11. We stretch the cable to the tweeters.

The article is missing:

• Photo of tools

Source:  https://drive2.ru/l/3912083/