Replacing the additional brake light Nissan Qashqai 2007 - 2013

Tools:

• Small flat screwdriver

Parts and consumables:

• Additional brake light

Replacing an additional brake light Nissan Qashqai

1. Disconnect a wire from the minus plug of the storage battery.

2. Gently pry off the edge of the secondary brake light.

3. Overcoming resistance of clamps, take a lantern from an aperture of a door of a back.

4. Press the clamp of the block of wires of the LEDs of the additional brake light Nissan Qashqai.

5. Disconnect the harness connector from the lamp connector.

6. Disconnect from the union of a washer jet of a window of a door of a back a hose and remove an additional stoplight.

Note:

In case of replacement of an additional brake light, remove the washer jet from the lantern by depressing the outer and inner clamps.

Washer jet external retainer

Washer jet internal retainer

7. Remove the washer jet from the auxiliary brake light.

8. Install the jet on the new additional brake light, and then install the lamp on the Nissan Qashqai in the reverse order of removal.

The article is missing:

• High-quality repair photos
• Tool photo

Source: http://nissan-qashqai.dv13.ru/elektrooborudovanie/zamena-dopolnitelnogo-stop-signala/