Replacing the windshield wiper blades Skoda Rapid.

To replace the wiper blades on the windshield of the Skoda Rapid, you need to move the wipers to the service position. Do not neglect this, otherwise you can damage the paint on the hood or ruin the plastic brush mount. Moreover, in the service position, replacing the brushes with a Skoda Rapid will take no more than 2 minutes.

In order to move the Skoda Rapid windshield wipers to the service position, do the following:

• Close the hood of the Skoda Rapid if it was open.
• Turn on and then turn off the car ignition.
• Press down on the lever - wiper switch
• Now you can bend the leash and safely proceed to replace the brushes.
• The fastening of the brushes is simple - with a button, so there will be no problems with replacement, the main thing is not to forget to press the lock button when you remove the brush. Naturally, the brush is removed from the hook, do not confuse when you tighten the brush, pulling in the other direction is pointless.

Replace the brushes before turning on the ignition. Your car's brushes are now ready to go.

Source: http://skoda-rapid-avto.ru/zamena-shetok/