Tools:
- L-shaped socket wrench 10 mm
Parts and consumables:
- Rechargeable battery (if necessary, replace)
Notes:
The battery is installed in a plastic casing in the engine compartment on the left side.
Gas engine
diesel engine
Removal and installation:
1. Depress the elastic locking tabs on the sides of the cover of the battery boot 1, tilt the boot about 45° and remove it in the direction of the arrow "A".
2. Press out the plastic tabs on the sides of the fuse box cover 2 and fold the fuse box in direction "B".
3. Loosen the nut 1 fastening the tip 3 of the wire to the "-" terminal of the battery and disconnect the wire tip from the "-" terminal.
4. Loosen the wire lug nut and disconnect the wire from the "+" terminal of the battery.
5. Move wire lugs aside
6. Turn away a bolt of 1 fastening and remove an arm 2.
7. Remove the battery from holder 1.
8. To remove the holder, unscrew two nuts 2 and bolt 3.
9. Reinstall holder and battery in reverse order.
9. When connecting the wires to the battery, tighten the fastening nuts so that the tips are put on the terminals tightly and cannot be moved by hand.
The article is missing:
- Tool photo
- Photo of parts and consumables
- High-quality repair photos
Source: http://www.navigator.mn/skoda-fabia.html









