Keys, key battery replacement and remote control synchronization

Tools:

• Small flat screwdriver

Parts and consumables:

• Key battery (if needed)
• Key light bulb (if replacement is needed)

Note:

Depending on the configuration, different sets of keys are attached to the car.

Key set (basic)

1 - keys;

2 - keychain.

In the basic configuration - two identical keys 1 with a plastic keychain 2. With the help of the key, all locks are opened and the ignition is switched on. The key fob has the number of the key series, by which, if necessary, you can order a duplicate. Keep your key fob in a safe place to keep your number private.

Illuminated key

1 - button;

2 - light bulb;

A - groove.

Some cars are equipped with illuminated keys. To turn on the backlight, press button 1.

You can use a coin to replace battery 3 or light bulb 4. To do this, insert a coin into slot "A" and pry off the top half of the key head. Replace battery 3 or bulb 4 and snap the top half into place.

Key with remote control (equipment with central locking)

1 - unlock button;

2 - lock button.

Cars equipped with central locking are supplied with remote control keys. Using buttons 1 and 2 in the key head, you can control the central lock.

Key fob with remote control (equipment with central locking and anti-theft system)

1 - unlock button;

2 - lock button;

3 – key button;

4 - button for unlocking the trunk.

Vehicles equipped with central locking and an anti-theft system may be supplied with a remote control with a retractable key. Using buttons 1, 2 and 3 on the key fob, you can control the central lock and anti-theft alarm.

Warning:

Remote control of the central lock operates within a radius of no more than 10 m. When the battery is discharged, the range is reduced.

Replacing the battery in the remote control key fob.

1 . Throw the key out.

2 . Carefully pry key part "A" away from transmitter housing "B" with a screwdriver.

3 . Remove the transmitter housing cover in the direction of the arrow.

4 . Remove the dead battery from the cover.

5 . Insert a new battery, making sure that the "+" mark on the battery is facing the inside of the cover. The correct polarity is marked on the cover body.

6 . Putting the cover with the inserted battery back on the body of the transmitter, squeeze both parts.

7 . Insert the body of the transmitter into the key so that both parts click into each other.

If, after replacing the battery, it is not possible to unlock and, accordingly, lock the car doors using the remote control device, then it is necessary to synchronize the device.

Synchronization of the remote control device.

1 . Press any push button on the remote control.

2 . Unlock the car door with the key within one minute of pressing the button.

Source:  http://carpedia.club