Checking the level and topping up the coolant Chevrolet Cruze J300 (2008 - 2016) Gasoline

Parts and consumables:

• Coolant
• rags

Warning:

Do not open the expansion tank cap while the engine is running or hot, as this will cause the coolant to boil and splash out, which can cause severe burns. Always wait until the engine has cooled down before opening the cover. Loosen the plug slowly, gradually releasing the pressure.

1.  The level of the coolant is controlled by the wall of the expansion tank, on which there is a mark for the maximum level "MAX" and the minimum level "MIN" of the liquid. The level should be between these two marks, closer to the maximum.

Note:

The expansion tank is located on the right at the rear of the engine compartment.

2. If the level has dropped to the minimum mark or below, it is necessary to add coolant. For this purpose open a stopper of a broad tank (the Warning see).

3.  Fill in the required amount of coolant.

4. Remove drips and wrap the plug of the expansion tank.

The article is missing:

• High-quality repair photos

Source:  carpedia.club