Soundproofing the floor of the cabin Mercedes-Benz Vito W639

Tools:

• ​Set of plastic mounting spatulas
• Scissors
• Knife
• Electric hair dryer technical
• Roller

Parts and consumables:

• rags
• White spirit (degreaser)
• Scotch
• Soundproofing for wheel arches STP Bimast Bomb Premium (4 mm) (approximately 2-3 sheets)
• Noise insulation for the floor Alumat Profy A4 (4 mm) (approx. 10 sheets)
• Noise absorbing material STP Accent 10 (approx. 6 sheets)

1. You need to remove the rear seat of the Mercedes Vito, plywood and all the elements that interfere with the noise insulation of the floor.

2.  Degrease the wheel arches and glue them with soundproofing (the left arch on the Mercedes Vito is already soundproofed).

STP Bimast Bomb Premium (4mm)

3.  Glue the floor with soundproofing and roll it with a roller.

Alumat Profy A4 (4 mm)

4.  Place STP Accent 10 noise-absorbing material on top (you can glue the seams with adhesive tape).

Soundproofing Mercedes Vito

STP Accent 10

5.  Install all removed parts in the reverse order of removal.

Useful advice:

If you do not have a hair dryer, then you can heat the material in the sun or on the stove.

The article is missing:

• Tool photo
• Photo of parts and consumables

Source:  http://carpedia.club/