Wiring diagram for the wiring harness on the Hyundai Solaris dashboard:
1, 2, 3 - pads for connecting to the front wiring harness;
4 - block diagnostics;
5 - connection block with floor wiring harness;
6, 7, 8 - blocks for connecting to the block and relay fuses in the cabin;
9, 10 - blocks for connecting to the driver's airbag wiring harness, sound signal and control of the head unit of the sound reproduction system;
11 - cover with jumpers;
12 - jumper block;
13 - immobilizer;
14 - switch for heating the brush stop zone;
15 - block of inputs of the head unit of the sound reproduction system;
16 – the switch of heating of back glass;
17 - right steering column switch;
18 - brake signal relay;
19 - lighting control unit;
20 - passenger airbag;
21 - alarm switch;
22 - immobilizer coil;
23 - block for connecting to the wiring harness the coil of the immobilizer and the microswitch and the ignition switch;
24 - microswitch in the ignition switch;
25 - ignition switch;
26 - left stalk switch;
27 - temperature sensor of the air supplied to the passenger compartment;
28 - heater fan;
29 - button for resetting the daily run;
30 - relay turns and alarm;
31 - brightness control of instrument illumination;
32 – a combination of devices;
33 - headlight beam direction regulator;
34 - recirculation damper gear motor;
35 - additional heater fan resistor;
36 - motor-reducer for drive distribution dampers;
37 - socket;
38 - cigarette lighter;
39 - control unit for passive safety elements;
40 - heating, ventilation and air conditioning control unit:
- X1 - connection block with the connector of the heater fan speed switch in the control unit;
- X2 - block connection with the connector of the electronic board of the control unit;
41 - head unit of the sound reproduction system;
42 - power package control unit;
43 - connection block with a ceiling wiring harness;
44 - parking sensors buzzer;
45 - connection block with the floor wiring harness of the body.
Source: http://carpedia.club/