Peugeot
207
1 generation [2006 - 2009]
Diesel
1 generation [2006 - 2009]
Maintenance
Body and Interior
Undercarriage
Transmission
Steering
Brake system
Engine
Electrical equipment
Ventilation and air conditioning system
Security system
Spare parts and consumables
Hughes and Relays
Generator
Starter
Engine management system
Lighting; Light and Sound Alarm
Car Audio
Sensor and switch replacement
Electric circuit
Other Articles
Add to garage Filter

External lighting control Peugeot 207

print share bookmark_border
0 Views
0.0 Rating
No tool
Not indicated
Car services nearby

Notes:

Never drive with the parking lights on only - danger of an accident! The marker lights  are not bright enough to provide adequate illumination of the road in front of the vehicle and to be visible to other road users. Therefore, in the dark and with poor visibility, always turn on the dipped beam.

When the car is parked for a long time, it is recommended to turn off the parking lights.

Light switches

The lighting is controlled by a ring switch on the lever.

In the mode of lights off and parking lights on, the driver can turn on the high beam headlights by pulling the lever towards himself.

The light signal is given by briefly pressing the switch.

In the headlights on mode, the switch  can take 3 positions:

1  - lighting off;

2  - side lighting is on;

3  - low / high beam is on.  

Note:

The operation of the included lighting devices is confirmed by the burning of the corresponding control lamp on the instrument cluster.

Turning on the fog lights

The fog lights are switched on by turning the ring switch.

To turn off the rear fog light, turn the switch ring back two positions.

To turn off the fog lights, turn the ring switch back while the parking lights remain on.

Headlight adjustment 

The headlight dimmer is located to the left of the driver's seat on the control panel.

In order not to dazzle other road users, it is necessary to adjust the angle of inclination of the headlight beams depending on the vehicle load:

0 - 1 or 2 people in the front seats.

 3 people;

1 - 4 people;

2 - 4 people + maximum permitted load;

3 - Driver + maximum permitted load.

Initial position of the regulator: "0".

Emergency light signaling

The visual warning system, by simultaneously turning on all the direction indicator lights, serves to warn other road users of an accident, towing or a traffic accident, or a forced stop. 

Click on the switch. At the same time, all direction indicator lights will flash. The emergency light signaling can work also at the switched-off ignition. 

Automatic activation of the emergency light signaling

In case of emergency braking and depending on the rate of deceleration, the hazard warning lights come on. The first time you press the accelerator pedal, they go out. If necessary, they can be extinguished by pressing the hazard warning light button on the instrument panel.

Source: carpedia.club

favorite 0
print
share
bookmark_border
None