Installing the front standard parking sensors

A small photo report on the installation.

Remove the headlights, 2 screws, torx.

We take out 4 pistons from the grille and the cable for opening the hood.

Unscrew 2 screws, torx.

We take out 6 caps under the bumper.

We take out 1 piston and unscrew 2 screws by 10 that hold the bumper on the wing.

We remove the bumper.

We remove the amplifier from the bumper.

We remove the PTF wiring from it (I used pliers with long ends).

We put on it a new wiring under the PTF and front parking sensors.

Next, cut holes in the bumper for the sensors. Clamps for sensors in the front grille cut off from a broken grille. 

We put the power button in the console.

Assemble everything in reverse order, connect the connector and flash it.

Front parking sensors. 

Rear parking aid.

Source: https://www.drive2.ru/l/288230376153204488/