![1 generation [2010 - 2015]](/uploads/Hyundai_ix_35_2013_-_2015_.jpg)
Tools:
- Mounting spatula set
Parts and consumables:
- Windshield washer jets (98630-2K100)
Note:
This article describes how to remove and replace washer nozzles on a Hyundai ix35.
1. With a small mounting spatula, we pry the washer nozzle in front and behind to wring out its fastening.
2. We take out the washer nozzle, and pull it out of the hose.
Windshield washer nozzle for Hyundai ix35.
3. Install the washer nozzles on the Hyundai ix35 in the reverse order of removal.
USEFUL TIPS:
Put a small splinter under the passenger nozzle so that it squirts like the driver's one.
Source: http://carpedia.club/
Installing hood shock absorbers (gas supports) Hyundai ix35
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument
Elimination of an unpleasant smell during the operation of the climate system (cleaning the air conditioner) Hyundai ix35
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
No tools
Replacing the intermediate shaft support bearing (right CV joint) Hyundai ix35
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Replacing the intermediate shaft seals in the transfer case (right CV joint) Hyundai ix35
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Pit / Flyover
Removal and installation of the battery Hyundai ix35
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument
Installing the rear view camera washer Hyundai ix35
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Replacing the rear springs on the Hyundai ix35
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Removing and replacing the cabin filter Hyundai ix35
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Hyundai ix35 tailgate wiper blade replacement
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
No tools
