We are working on replacing the door glass.
Take off the door trim.
We pry off the front edge of the inner door glass seal and remove it from the inner door panel.
Having connected the block of the wiring harness to the switch of the power window control unit of the front doors, we lower the glass so that there is access to the self-tapping screws of the glass holders to the power window slider.
Using the Torx T-20 key, we unscrew the two screws securing the glass holders to the window regulator slider.
Turning the glass, as shown in the photo, take it out of the door.
If necessary, remove the glass holders.
Using a screwdriver, push the glass holder retainer.
We take out the holder from the hole in the glass.
Install the front door glass in reverse order.
Source: http://www.renault-duster.dv13.ru/kuzov/snyatie-stekla-perednej-dveri/

