Description of the instrument cluster Mercedes-Benz Vito W639

The photo shows the location of the instruments and signaling devices in the instrument cluster.

Dashboard on Mercedes Vito

The following devices and signaling devices are installed in the instrument cluster:

1 - Button for controlling the multifunctional display "menu".

2 - Button for controlling the multifunctional display "reset".

3 - The induction type speedometer shows how fast the car is currently moving. The scale is calibrated from 0 to 180-220 km/h (depending on configuration), scale division is 10 km/h. The speedometer drive is electric from a sensor mounted on the gearbox.

Speedometer Mercedes Vito

4 - Multifunctional display (standard or Hight-line). The trip computer is an information system that displays information about the trip on the display: the range of the car on the fuel remaining in the tank, average and current fuel consumption, odometer, average speed, travel time, air temperature, hours, information about the outside temperature .

5 - Tachometer. Shows the engine speed. The scale has divisions from 0 to 5. In order to find out the crankshaft speed in min–1, you need to multiply the tachometer readings by 100. The red zone is a mode that is dangerous for the engine.  

Tachometer Mercedes Vito

6 - Control button "minus".

7 -  Control button "plus".

Note:

Newer models have a fuel indicator on the dashboard.

Light indicators in the instrument cluster:

1 -  Malfunction of lighting lamps. Checking outdoor lighting is described in  this article .

2 - Door(s) not closed.

3 -  High beam indicator. Checking outdoor lighting is described in  this article .

4 -  Faulty fan.

5 - Electronic body leveling system ( ENR ).

6 -  Fasten your seat belts.

7 -  The battery is not charging. 

8 -  Worn brake pads. Front brake pad replacement is described in this article , rear pad replacement is described in this article , parking brake pad replacement is described in this article .

9 - Parking brake applied.

10 - Left turn indicator.

11 -  Right turn indicator.

12 -  Indicator of through heating.

13 - Acceleration control system.

14 - Acceleration control system / electro-pneumatic active power control system ( ASR / EPS ).

15 - Anti-lock braking system ( ABS ).

16 - Onboard engine diagnostics (check engine).

17 - The oil level is below normal. The process of checking the level and how to add oil to a Mercedes Vito is described in this article .

18 - Brake fluid level. Checking the level and adding oil is described in  this article .

19 - Additional security system.

20 - The temperature of the coolant is above normal.

21 - The coolant level is below normal. Checking the level and topping up the coolant is described in this article .

22 - Fuel filter dirty. Fuel filter replacement is described in this article .

23 - Water in the fuel filter. Fuel filter replacement is described in  this article .

24 - Air filter dirty. Air filter replacement is described in this article .

25 - The fluid level in the washer reservoir is below normal. The process of checking the level and adding fluid to the washer reservoir is described in this article .

26 -  Signal indicator of low fuel level.

27 - Slip signal indicator.

28 - Fuel economy indicator.

29 -  Automatic adjustment of the engine speed.

30 -  Particulate filter indicators.

32 - Low beam indicator. Checking outdoor lighting is described in this article .

Source:  http://carpedia.club/