Installing the sprocket and oil pump drive chain Toyota Camry 2001 - 2006

Tools:

• Nozzle on the crank 10 mm
• socket wrench
• torque wrench
• Pin diameter 4 mm

Parts and consumables:

• Oil pump drive chain
• Oil pump drive sprocket
• crankshaft sprocket

Note:

Removing the Toyota Camry oil pump drive chain is described here .

1. To install the oil pump drive chain and sprocket, install the crankshaft with the key to the left and the oil pump shaft with the notch up as shown in the figure.

Installing the oil pump drive shaft

2. Install the chain on the sprockets, lining up the links with the colored marks and the marks on the sprockets.

Correct installation of the chain on the sprockets

3. Install the sprockets on the shafts and temporarily tighten the fastening nut.

4. Install the oil pump drive chain tensioner by inserting the tensioner spring into the hole.

5. Tighten the tensioner fastening nut with a tightening torque of 12 Nm.

6. Align the oil pump drive shaft hole with the pump groove as shown.

Alignment of the oil pump drive shaft hole with the pump groove

7. Insert a pin with a diameter of 4 mm into the hole in the shaft and, fixing it, tighten the nut with a tightening torque of 30 Nm.

8. Rotate the crankshaft 90° clockwise with the shaft key oriented vertically up.

9. Install the crankshaft sprocket.

Correct orientation of the oil pump drive shaft key

The article is missing:

• High-quality repair photos

Source: http://carmanz.com/toyota/camry-2001-2006/230242-tc2001360.html