![1 generation [2010 - 2015]](/uploads/Hyundai_ix_35_2013_-_2015_.jpg)
Tools:
- balloon wrench
- Emphasis (shoe) recoil
- Support legs
- screw jack
- Open-end wrench 14 mm
- File flat
Note:
This article describes how to fix brake pad squeak on Hyundai ix35.
In the rear brake pads, an unpleasant squeak may appear when braking, it indicates that it is time to change the brake pads. The squeak can be removed by removing the brake pad wear indicator.
WARNING:
If the rear brakes squeak, check the thickness of the pads and, if necessary, replace them.
1. Engage 1st gear (transfer the automatic transmission selector to the “P” position) and install wheel chocks (“boots”) under the front wheels.
2. Loosen the wheel nuts, jack up the rear of the vehicle, place the vehicle on jack stands, and remove the wheel.
WARNING:
Loosen and tighten the wheel nuts only with the vehicle on the ground.
3. Using the “14” wrench, unscrew the upper bolt securing the caliper to the guide pin, and carefully tilt the caliper back.
4. Remove the brake pads.
Rear pads for Hyundai ix35.
5. Remove or file off the tendril that creates an unpleasant squeak.
Cut pad indicator for Hyundai ix35.
6. Install the rear wheel brake pads on the Hyundai ix35 in the reverse order of removal.
The article is missing:
- Tool photo
Source: http://carpedia.club/
